Cookies are used to make the most of our website. By logging in to this site you are deemed to accept the use of cookies. To learn more about cookies and our policy, please click on the link below.
SG36 NC Surface Grinder
- Technical Detail
- Description
| SG36 NC Surface Grinder | |
|---|---|
| Main Motor Power | 4 kW, 400 V w |
| Table Dimensions | 300x600 mm |
| Table Longitudinal Hydraulic Travel | 660 mm |
| Table Transverse Manual Travel | 340 mm |
| Distance Between Spindle and Table | 520 mm |
| Table Load Capacity(Max.) | 420 kg |
| T Channel Dimensions | 1x14 mm |
| Table Moving Speed | 5~25 m/dak |
| Y Axis Handwheel Feed Line | 0,02 mm |
| Y Axis Handwheel One Turn | 5 mm |
| Automatic Y-axis Movement | 0,5~12 mm |
| Y-axis Rapid Speed | 790 mm/min |
| Stone Dimensions, Diameter x Width x Hole Diameter | 355x40x127 mm |
| Spindle Speed | 1450 rpm |
| Z Axis Handwheel Feed Line | 0,001 mm |
| Z Axis Handwheel One Turn | 0,1 mm |
| Automatic down feed precision (rate) | 0,001~1 |
| Z-axis feeding speed | 230 mm/min |
| Hydraulic Motor Power | 1,5 kW |
| Dust Collection Motor Power | 550 w |
| Cooling Engine Power | 90 w |
| Y-axis (Vertical) Motor Capacity | 90 w |
| Z-axis (Cross feed) Motor Capacity | 1 w |
| Verge Dimensions | 2600x2500 mm |
| Dimensions (L x W x H) | 2150x1940x2195 mm |
| Net Weight | 1910 kg |
| Gross Weight | 2210 kg |
Features:
• X-axis with hydraulic drive
• Heavy-duty rigid cast iron machine bed
• High precision long service NSK P4 grade spindle ball bearing
• V-type high precision long-term use guideways
• Hardened and grinded table slideways
• Teflon laminated slideways
• Centralized lubrication system
• Separate hydraulic tank prevents heat and vibrations from
being transferred to the machine
• Hydraulic clutch system
• Chuck and Tool holder safety shields
• Ergonomic and easily accessible electric panel
• Adjustable (variable) magnetic force
• Safety 24V control circuit power
• CE Standard
Main Configuration of the Machine:
• Spindle motor: ABB trademark
• Spindle bearing: NSK trademark (Japan)
P4 grade high precision ball bearing
• Y axis spindle: P5 grade precision ball screw
• Main electrical components: SIEMENS
• Main hydraulic components by Taiwan’s
trade mark
SG36 NC
• Automatic cross feed with
precise step up to 0,001 mm
SIEMENS PLC control system
with touch screen and
servo motor drive for vertical
(Z-axis) feed
Standard Accessories
• Grinding wheel
• Grinding wheel flange
• Balancing stand
• Balancing shaft (arbor)
• Wheel dresser (diamond dresser)
• Anchor bolt
• Hydraulic oil tank
• Magnetic separator
• Magnetic table
• Cooling system
• Machine lamp
• Pads
• Operating Tools